How to Resolve Canon Printer Not Printing Color Error?
Canon printers offer a great printing experience. However, sometimes issues arise in the print outputs. Users commonly complain about Canon printer not printing color. The outputs are blurred with wrong colors or no color. But this print quality issue is fixable. There are a few effective workarounds to use to troubleshoot their causes. Keep reading to know different ways to overcome this print output problem with Canon printers.
How
to Resolve Canon Printer Not Printing Color
Use these solutions to
eliminate the printer issue and get quality outputs.
1. Perform a nozzle check pattern printing.
If you find an improper nozzle check pattern printout, find whether any color ink tanks are empty. However, clean the printhead if the tanks are full or have much ink, but the printer still doesn’t print.
After that, print the
nozzle check pattern again to find whether the ink is ejected properly. If
still, you face the same issue, perform printhead cleaning again. You can opt
for the printhead deep cleaning. After that, turn off the printer and perform
deep cleaning the next day.
2. Turn on color printing settings.
You may find Canon printer not printing color if you
haven’t enabled the color printing option.
● Tap the ‘Start’ button on your system.
● Launch the ‘Settings’ tab.
● Here, click on ‘Printers and Scanners.’
● Now, from the list of printers, choose your Canon printer.
● Tap the ‘Properties’ tab.
● Find if you’ve turned on the color printing option.
● If not, enable it and print a test page.
3. Restart Canon printer
Some issues, like problems
in print quality and the printer being unresponsive can be fixed by performing
a hard reset. So, if you notice your Canon
printer offline, do a hard reset. This will also delete the print data
in all the interfaces.
● Press the ‘Reset button present on the ‘Control Panel.’
● There will be two menus; ‘Reset’ and ‘Soft Reset.’
● Choose ‘Soft Reset.’
● After that, hold down the ‘OK’ button.
● Do it till hard reset is displayed.
● When you see it, release the button.
● The hard reset will be finished after ‘<03 HARD RESET>’ disappears.
● Now, check if your printer has become responsive.
4. Update the printer driver.
Faulty printer drivers also
prevent Canon printers from responding. Printer offline, and issues in print
quality can be fixed by updating Canon printer drivers.
● Open the ‘Device Manager’ section.
● Do so by holding the Windows key and R.
● Locate your printing device below ‘Print Queues.’
● Right-tap on your Canon printer.
● Choose ‘Update Driver.’
● Choose to search automatically for driver updates.
● After that, restart your system.
● Restart the Canon printer as well and check if it becomes responsive.
5. Examine the ink cartridge.
● Access the cartridge by opening the printer’s door.
● Remove the cartridge and replace it with the correct ink.
● Now, place the cartridge in its slot back.
● Give a color test print command.
Final
Words
Hopefully, now you can
easily fix the Canon
printer not printing color correctly error. All the resolutions above
are fairly easy to implement and do not require much technical expertise.
However, consult a printer technical support expert if you still find the
problem after performing these measures.
Comments
Post a Comment